Sony Nex 5 Cannot Recognize Lens. Sometimes it will reset if you remove the lens and then the battery. You could also check to see if you can reset your camera to factory defaults once the lens is removed.
![sony nex 5R ขึ้นโชว์ cannot recognize lens ค่ะ แก้ปัญหายังไงดีคะ Pantip](https://i2.wp.com/f.ptcdn.info/548/012/000/1385346857-photo-o.jpg)
Camera has been working fine till this morning, when it now says cannot recognize lens attach it properly. Web i think i have a similar issue. You could also check to see if you can reset your camera to factory defaults once the lens is removed.
Although Other Lens Manufacturers' Products May Work With Sony Cameras, We Don't Guarantee Full Operation.
Repair information and service assistance. You could also check to see if you can reset your camera to factory defaults once the lens is removed. If there is dirt on the contacts of the body or the lens, the camera body may not recognize the lens due to attachment failure.
If There Is Dirt On The Contacts Of The Body Or The Lens, The Camera Body May Not Recognize The Lens Due To Attachment Failure.
Downloads are posted on your model support page. Manually set the shutter speed, aperture, iso, and focus. The camera isn’t damaged at all and is still as good as new.
And I Have The Adapters) I Get This Same Message.
Web skip to main content. Remove the lens from the body of the camera. Once it brings up this message, i can't operate anything else including the menu / setup.
This Worked The First Few Times That I Got This Message, But Then It Stopped Recognizing The Lens Altogether.
I went thru the settings but can't find anything. The camera does recognize my zoom lens and i have no issues taking pictures with the zoom in place. Examine the pins on the body of the camera that connect to the lens.
Web Set The Release W/O Lens Option In The Camera Menu To Enable.
Camera has been working fine till this morning, when it now says cannot recognize lens attach it properly. It worked after it was dropped, but couple days later i get the message that the lens cannot be recognized. There's no electrical connection between the mount and camera body.