Viewsonic Monitor No Signal Then Turns Off. A pop up will appear asking if you wish to keep these display settings. Web the problem of no signal with your viewsonic monitor might be problematic and stressful.
Go to “ system ,” then display ,” then look for “ display resolution.” change to desired resolution. This can be due to a faulty graphics card or because the cable used to connect the monitor is damaged or outdated. Unplug and reboot monitor and pc adjust monitor to the correct input inspect display cables check monitor resolution settings ensure input cable is plugged into graphic card.
Select “ Keep Changes.” Check Pc’s Hardware
Web connect the mini hdmi cable from your external device to the mini hdmi port on the monitor. Make sure the blue light filter is off. Turn off the monitor, unplug the power cable for 15 seconds and plug the power cable back then turn on.
Solution 2 Make Sure The Power Cord Is Properly And Securely Connected To The Monitor And Power Outlet.
But don’t stress, this problem will be fixed by utilizing some troubleshooting methods and techniques. Tue, 8 may, 2018 at 11:34 am if the monitor turns on briefly, then turns off, check the following: If above doesn’t help, please contact viewsonic service center.
Web To Fix The Viewsonic Monitor No Signal Problem, Follow These 7 Troubleshooting Steps And Be Back Up And Running In No Time:
Web turn off the monitor, unplug the power cord, plug it back in, and then turn on the monitor. The control panel keys do not work: A defective hdmi or vga cable can also cause such no signal problem.
Power Cycle Your Viewsonic Monitor.
Make sure the power cable is securely connected. Unplug and reboot monitor and pc adjust monitor to the correct input inspect display cables check monitor resolution settings ensure input cable is plugged into graphic card. Web if the monitor turns on briefly, then turns off, check the following:
Loose Or Disconnected Video Cable.
Check if you selected the correct input source Web do not mix up hdmi 2.0 and hdmi 1.4 input ports as it may lead to a blank screen. Connect the usb type a to type c cable from your external device to the monitor to enable touch controls.